Minuteman X Ride 28 Carpet Extractor
Minuteman X Ride 28 Carpet Extractor
The X Ride 28 is a 28″ rider carpet extractor which cleans large carpeted areas quickly while the operator rides in comfort. In one pass it scrubs and vacuums up water. It can be purchased with a Chemical Free Solution option that generates ozone to sanitize, deodorize and purify. It's compact enough to fit in narrow spaces, but the off-aisle wand allows for cleaning where even the machine cannot go.
Key Features
- Cylindrical scrubbing action cleans both sides of the carpet fiber
- 27 gallon solution tank and 24.5 gallon recovery tank (Large, for less emptying and filling)
- Two nozzle modes : Interim – 1/2 gallon per minute @ 50psi and Restorative – 1 gallon per minute @ 100psi
- Convenient drain port for recovery tank clean-out
- When the on-board charger is plugged in, the machine is not operable
- Off-aisle recovery wand and 25 foot of hose mounted on-board
- AGM maintenance-free battery pack
- Easy-to-understand controls
- Compact, ride-on design results in total operator comfort by focusing on ergonomics
- Sleek design provides an excellent line of sight to the area to be cleaned
- Low sound level
- Tool free brush removal
- Seat sensor shuts off unit once operator leaves platform
- On-board vac & solution wand for maximum water pickup
Technical Specifications
| Recovery Tank Capacity | |
| Solution Tank Capacity | |
| Vacuum Flow | 152 cfm |
| Vacuum Power | (2) 36 volt 1 HP |
| Water Lift | 70" |
| Front Wheels | 3" x 10" Polyurethane |
| Rear Wheels | 3" x 12" Soft Ride Cross Hatch |
| Brush Deck Options | |
| Cleaning Path |
More Carpet Extractors
- 20" Cleaning Path
- 75 ft Power Cord
- 25-gal Recovery and Solution Tanks
- Compact, 14" cleaning path
- 3-way solution control switch allows operator to put down water manually or continuously
- Built to protect the vac motor and prevent corrosion
- 100 psi and 500 psi Options
- 10" Non-Marking Rear Wheels
- 12-gal Solution Tank and 11-gal Recovery Tank



